Job Overview:
The landing gear bushings play an important role in high-stress applications where vibrations and wear is problematic.
Bushings that connect struts or shocks to the airframe are metal to absorb vibrations and prevent wear to the larger components.
Without bushings, the landing gear system cannot effectively absorb vibrations, resulting in a bumpier landing to the aircraft on landing.
Sizing and installation of the bushing is a critical task.
Incorrect sizing of bushing will result in premature wear at the landing gear linkages and struts.
This role is to carry out critical measurements of bushing requirements, ensuring the bushings are correctly corrosion treated and installation of the bushings.
Roles & Responsibilities:
- Carry out production work as assigned by the Flow Leader or Team Leader.
- Carry out housekeeping tasks according to the Flow Leader or Team Leader's instructions to maintain 6S.
- Carry out routine maintenance equipment and fixtures.
(TPM daily, monthly and quarterly) - To work out the bush sizes for each job requirement.
- Perform inspection of bushing received before sending for special processes (i.e. Plating, NDT)
- Install bushing, bearings, sleeves using machinery and hydraulic presses.
- Execute bush boring to required size by means of light machining (i.e. honing and reaming)
- Perform surface preparation of component prior to sealant application by degreasing.
- Prepare and apply sealant on aircraft component according to Component Maintenance Manual (CMM).
- Perform regular checks on equipment
- Active participation in 6S programme and continuous improvement projects
- Participate in problem-solving
- Participate actively in contributing to HSE development and improvement.
- Secondary role in the Pre-assembly Section may include Spray Painting and Paint Booth Maintenance.
- Any other duties as assigned.
Job Requirements:
- Candidate must possess at least Professional Certificate/NiTEC in Engineering (Aviation/Aeronautics/Astronautics), Engineering (Electrical/Electronic), Engineering (Mechanical) or equivalent.
- Highly accurate and detailed along with precision needed to accomplish the role.
- At least 1 Year(s) of working experience in the related field is required for this position.
- Preferably Non-Executive specialized in Aviation/Aircraft Maintenance or equivalent.
- Committed and able to work OT if required
- Good and consistent attendance at work.
- Observe good punctuality during working hours.
- Disciplined and self-motivated with emphasis on quality work.
Professional Experience:
- Able to read blueprint, drawings or engineering information to determine the bushing installation requirements.
- Able to apply math and use measuring instruments (i.e. micrometer,etc)